DISPLAYTEKNOLOGI OG BRP AUDIO

Alle køretøjsfejl, der ikke er motorrelaterede (dvs.: affjedring, servostyring) vil bruge dette nye ikon i stedet for ikonet for kontrol af motoren. 

RT models now have a self-leveling suspension like the F3-LTD for optimal comfort.

Brightness will be adjusted automatically based on the level of ambient light.  To manually adjust it, open the menu go into the settings, select Display and adjust the brightness to the desired setting using the joystick on the handlebar.

12 forudinstillinger (3 sider af 4 forudindstillinger) kan gennem til FM.

The tuner will seek the FM band and for the first 12 frequencies with an acceptable reception level, and then save them.

Yes.

Hvis du har en Bluetooth modtager på din hjelm, vil du være i stand til at besvare opkald. 

Yes, but “favorites” will not be accessible.

No, sound to the passenger helmet will be cut during a phone call.

Yes, the same information shown on the phone will appear on the cluster.

No,there will be no access to text messages while riding.

Åbn menuen, gå ind i statistik. Når du først er i denne menu, kan du enten nulstille din triptæller eller vælge en ny, der skal vises på din måler. 

3 sets of statistic are saved in the gauge:  Total, Trip A and Trip B, giving you the flexibility to save your daily, weekly or seasonal ride statistics, as you see fit.

No, BUDS2 will transfer the odometer from the previous cluster to the new cluster. If the old cluster is not functional anymore, a backup of the odometer stored in the engine controller will be used.

Ja. To muligheder er tilgængelige - via Bluetooth eller via 3.5mm aux ledning.

No, USB sticks are not supported.

No, you’ll need to use the Music app in BRP Connect to access your music library.

Yes.

Yes, when connected via Bluetooth you can listen to music via your vehicle but the App needs to be running on the phone first.

Du kan vælge at afspille musikken på køretøjets højtalere eler det tilsluttede headset. Musik kan ikke afspilles på både højtalerne og headsettet samtidigt. 

Most aftermarket devices should be compatible, but tests have been done specifically on SENA and N-Com (Nolan) headsets.

Headset connected as “Driver Helmet” will receive phone calls from the phone connected to the cluster.

Yes, the cluster volume will change the volume in the helmet. You can also adjust the volume directly on your helmet headset (driver and passenger helmets can have different volumes).

Ja. Åbn menuen, gå ind i indstillinger, vælg Display og juster lysstyrken til den ønskede indstilling ved hjælp af joystikket på styret. 

Yes, display brightness will be adjusted based on ambient light. The brightness menu applies an offset to the adjusted backlight. There is no day or night mode, the same offset is applied all the time.

Open the menu, go into the settings, select Clock and adjust the time using the joystick on the handlebar.

Open the menu, go into the settings, select Units and choose either imperial (mph) or metric (kph) using the joystick on the handlebar. The temperature unit will also change automatically (metric = km and Celsius / Imperial = mi and Fahrenheit).

Yes, English, German, French, Finnish, Spanish, Norwegian, Swedish, Italian, Dutch, Portuguese (Brazil) are available. Russian and Japanese will be available in the near future.

 Yes, there is a fault code menu in the settings.

No.

No, when speed is above 3 MPH, the settings menu will be blocked, but riders will not be kicked out of the menu. They may resume the setting operations once the vehicle speed drops below lower than 3 MPH again.

The version of the display firmware installed on your vehicle can easily be found under the “settings” (long press on the center of the controller located on the left handlebar, last menu at the bottom). Choose the second-to-last menu titled “About.” The firmware version is at the top of the screen.